Varnish 4.x — Plone Documentation v4.3

Introduction ¶

This chapter contains information about using the Varnish caching proxy with Plone.

http://varnish-cache.org/

To use Varnish with Plone

Learn how to install and configure Varnish
Add Plone virtual hosting rule to the default varnish configuration

Note

After a radically change of VCL language in Varnish 3.x (Jun 2011), again we had radical changes in the Varnish 4.x (Apr 2014) syntax of VCL language and command line tools.

Installation ¶

The suggest method to install Varnish is to use your OS package manager.

You can install using packages (RPM/DEB) - consult your operating system instructions.
For more up to date packages for Debian you could check: https://www.varnish-cache.org/installation/debian
For more up to date packages for RedHat (RPM Based) you could check: https://www.varnish-cache.org/installation/redhat
You can install backports
You can install using buildout

Buildout examples

https://pypi.python.org/pypi/plone.recipe.varnish

Management console ¶

Telnet console ¶

The telnet management console is available on some configurations where varnishadm cannot be used. The functionality is the same.

Example:

                          ssh yourhost
# Your system does not have a secret handshake file
telnet localhost 6082

                        

Note

Port number depends on your Varnish settings.

More info ¶

http://opensourcehacker.com/2013/02/07/varnish-shell-singleliners-reload-config-purge-cache-and-test-hits/

Quit console ¶

Quit command:

quit

Purging the cache ¶

This will remove all entries from the Varnish cache:

varnishadm "ban req.url ~ ."

Or remove all entries of JPG from the Varnish cache:

varnishadm "ban req.url ~ .jpg"

Loading new VCL to live Varnish ¶

More often than not, it is beneficial to load new configuration without bringing the cache down for maintenance. Using this method also checks the new VCL for syntax errors before activating it. Logging in to Varnish CLI requires the varnishadm tool, the address of the management interface, and the secret file for authentication.

See the varnishadm man-page for details.

Opening a new CLI connection to the Varnish console, in a buildout-based Varnish installation:

parts/varnish-build/bin/varnishadm -T localhost:8088

Port 8088 is defined in buildout.cfg:

                        [varnish-instance]
telnet = localhost:8088

Opening a new CLI connection to the Varnish console, in a system-wide Varnish installation on Ubuntu/Debian:

varnishadm -T localhost:6082 -S /etc/varnish/secret

You can dynamically load and parse a new VCL config file to memory:

vcl.load <name> <file>

For example:

vcl.load newconf_1 /etc/varnish/newconf.vcl

... or ...

                        # Ubuntu / Debian default config
vcl.load defconf1 /etc/varnish/default.vcl

vcl.load will load and compile the new configuration. Compilation will fail and report on syntax errors. Now that the new configuration has been loaded, it can be activated with:

vcl.use newconf_1

Note

Varnish remembers <name> in vcl.load, so every time you need to reload your config you need to invent a new name for vcl.load / vcl.use command pair.

See

http://opensourcehacker.com/2013/02/07/varnish-shell-singleliners-reload-config-purge-cache-and-test-hits/

Logs ¶

To see a real-time log dump (in a system-wide Varnish configuration):

varnishlog

By default, Varnish does not log to any file and keeps the log only in memory. If you want to extract Apache-like logs from varnish, you need to use the varnishncsa utility.

Stats ¶

Check live "top-like" Varnish statistics:

parts/varnish-build/bin/varnishstat

Use the admin console to print stats for you:

                        Uptime mgt:   8+00:21:20
Uptime child: 5+17:29:28

  NAME                                                                CURRENT       CHANGE      AVERAGE       AVG_10      AVG_100     AVG_1000
MAIN.uptime                                                            494968         1.00         1.00         1.00         1.00         1.00
MAIN.sess_conn                                                           1545         0.00          .           0.00         0.00         0.00
MAIN.client_req                                                          1569         0.00          .           0.00         0.00         0.00
MAIN.cache_hit                                                            461         0.00          .           0.00         0.00         0.00
MAIN.cache_hitpass                                                         16         0.00          .           0.00         0.00         0.00
MAIN.cache_miss                                                           477         0.00          .           0.00         0.00         0.00
MAIN.backend_conn                                                        1060         0.00          .           0.00         0.00         0.00
MAIN.fetch_head                                                            18         0.00          .           0.00         0.00         0.00
MAIN.fetch_length                                                         996         0.00          .           0.00         0.00         0.00
MAIN.fetch_204                                                              1         0.00          .           0.00         0.00         0.00
MAIN.fetch_304                                                             46         0.00          .           0.00         0.00         0.00
MAIN.pools                                                                  9         0.00          .           9.00         9.00         9.00
MAIN.threads                                                              900         0.00          .         900.00       900.00       900.00
MAIN.threads_created                                                      900         0.00          .           0.00         0.00         0.00
...

                      

Virtual hosting proxy rule ¶

Varnish 4.x example ¶

Varnish 4.x has been released, almost three years after the release of Varnish 3.0 in June 2011. The backend fetching parts of VCL again have changed in Varnish 4.

An example with two separate Plone installations (Zope standalone mode) behind Varnish 4.x HTTP 80 port.

Example:

                          # To make sure that people have upgraded their VCL to the current version,
# Varnish now requires the first line of VCL to indicate the VCL version number
vcl 4.0;

#
# This backend never responds... we get hit in the case of bad virtualhost name
#
backend default {
    .host = "127.0.0.1";
    .port = "55555";
}

#
# Plone Zope clients
#
backend site1 {
    .host = "127.0.0.1";
    .port = "9944";
}

backend site2 {
    .host = "127.0.0.1";
    .port = "9966";
}

#
# Guess which site / virtualhost we are diving into.
# Apache, Nginx or Plone directly
#
sub choose_backend {

    if (req.http.host ~ "^(.*\.)?site2\.fi(:[0-9]+)?$") {
        set req.backend_hint = site2;

        # Zope VirtualHostMonster
        set req.url = "/VirtualHostBase/http/" + req.http.host + ":80/Plone/VirtualHostRoot" + req.url;

    }

    if (req.http.host ~ "^(.*\.)?site1\.fi(:[0-9]+)?$") {
        set req.backend_hint = site1;

        # Zope VirtualHostMonster
        set req.url = "/VirtualHostBase/http/" + req.http.host + ":80/Plone/VirtualHostRoot" + req.url;
    }

}

# For now, we'll only allow purges coming from localhost
acl purge {
    "127.0.0.1";
    "localhost";
}

sub vcl_recv {

    #
    # Do Plone cookie sanitization, so cookies do not destroy cacheable anonymous pages
    #
    if (req.http.Cookie) {
        set req.http.Cookie = ";" + req.http.Cookie;
        set req.http.Cookie = regsuball(req.http.Cookie, "; +", ";");
        set req.http.Cookie = regsuball(req.http.Cookie, ";(statusmessages|__ac|_ZopeId|__cp)=", "; \1=");
        set req.http.Cookie = regsuball(req.http.Cookie, ";[^ ][^;]*", "");
        set req.http.Cookie = regsuball(req.http.Cookie, "^[; ]+|[; ]+$", "");

        if (req.http.Cookie == "") {
            unset req.http.Cookie;
        }
    }

    call choose_backend;

    if (req.method != "GET" &&
      req.method != "HEAD" &&
      req.method != "PUT" &&
      req.method != "POST" &&
      req.method != "TRACE" &&
      req.method != "OPTIONS" &&
      req.method != "DELETE") {
        /* Non-RFC2616 or CONNECT which is weird. */
        return (pipe);
    }
    if (req.method != "GET" && req.method != "HEAD") {
        /* We only deal with GET and HEAD by default */
        return (pass);
    }
    if (req.http.Authorization || req.http.Cookie) {
        /* Not cacheable by default */
        return (pass);
    }
    return (hash);
}

sub vcl_hash {
    hash_data(req.url);
    if (req.http.host) {
        hash_data(req.http.host);
    } else {
        hash_data(server.ip);
    }
    return (lookup);
}

# error() is now synth()
sub vcl_synth {
    if (resp.status == 720) {
        # We use this special error status 720 to force redirects with 301 (permanent) redirects
        # To use this, call the following from anywhere in vcl_recv: error 720 "http://host/new.html"
        set resp.status = 301;
        set resp.http.Location = resp.reason;
        return (deliver);
    } elseif (resp.status == 721) {
        # And we use error status 721 to force redirects with a 302 (temporary) redirect
        # To use this, call the following from anywhere in vcl_recv: error 720 "http://host/new.html"
        set resp.status = 302;
        set resp.http.Location = resp.reason;
        return (deliver);
    }

    return (deliver);
}

sub vcl_synth {
    set resp.http.Content-Type = "text/html; charset=utf-8";
    set resp.http.Retry-After = "5";

    synthetic( {"
            <?xml version="1.0" encoding="utf-8"?>
            <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
            <html>
              <head>
                <title>"} + resp.status + " " + resp.reason + {"</title>
              </head>
              <body>
                <h1>Error "} + resp.status + " " + resp.reason + {"</h1>
                <p>"} + resp.reason + {"</p>
                <h3>Guru Meditation:</h3>
                <p>XID: "} + req.xid + {"</p>
                <hr>
                <p>Varnish cache server</p>
              </body>
            </html>
    "} );

    return (deliver);
}

                        

For VCL examples Varnish 2.x or 3.x, you will want to look into Varnish 3.x

Varnishd port and IP address to listen ¶

You give IP address(s) and ports for Varnish to listen to on the varnishd command line using -a switch. Edit /etc/default/varnish:

                        DAEMON_OPTS="-a 192.168.1.1:80 \
             -T localhost:6082 \
             -f /etc/varnish/default.vcl \
             -s file,/var/lib/varnish/$INSTANCE/varnish_storage.bin,1G"

                      

Cached and editor sub domains ¶

You can provide an uncached version of the site for editors:

http://serverfault.com/questions/297541/varnish-cached-and-non-cached-subdomains/297547#297547

Varnish and I18N ¶

Please see cache issues related to LinguaPlone.

Sanitizing cookies ¶

Any cookie set on the server side (session cookie) or on the client-side (e.g. Google Analytics Javascript cookies) is poison for caching the anonymous visitor content.

HTTP caching needs to deal with both HTTP request and response cookie handling

HTTP request Cookie header. The browser sending HTTP request with Cookie header confuses Varnish cache look-up. This header can be set by Javascript also, not just by the server. Cookie can be preprocessed in varnish's vcl_recv step.
HTTP response Set-Cookie header. This sets a server-side cookie. If your server is setting cookies Varnish does not cache these responses by default. However, this might be desirable behavior if e.g. multi-lingual content is served from one URL with language cookies. Set-Cookie can be post-processed in varnish's vcl_fetch step.

Example of removing all Plone-related cookies, besides ones dealing with the logged in users (content authors):

                        sub vcl_recv {

  if (req.http.Cookie) {
      # (logged in user, status message - NO session storage or language cookie)
      set req.http.Cookie = ";" req.http.Cookie;
      set req.http.Cookie = regsuball(req.http.Cookie, "; +", ";");
      set req.http.Cookie = regsuball(req.http.Cookie, ";(statusmessages|__ac|_ZopeId|__cp)=", "; \1=");
      set req.http.Cookie = regsuball(req.http.Cookie, ";[^ ][^;]*", "");
      set req.http.Cookie = regsuball(req.http.Cookie, "^[; ]+|[; ]+$", "");

      if (req.http.Cookie == "") {
          unset req.http.Cookie;
      }
  }
  ...

sub vcl_backend_response {

    # Here we could unset cookies explicitly,
    # but we assume plone.app.caching extension does it jobs
    # and no extra cookies fall through for HTTP responses we'd like to cache
    # (like images)

    if (beresp.ttl <= 0s
            || beresp.http.Set-Cookie
            || beresp.http.Surrogate-control ~ "no-store"
            || (!beresp.http.Surrogate-Control && beresp.http.Cache-Control ~ "no-cache|no-store|private")
            || beresp.http.Vary == "*") {
                    /* * Mark as "Hit-For-Pass" for the next 2 minutes */
                    set beresp.ttl = 120s;
                    set beresp.uncacheable = true;
    }

    set beresp.grace = 120s;
    return (deliver);
}

                      

An example how to purge Google cookies only and allow other cookies by default:

                        sub vcl_recv {
    # Remove Google Analytics cookies - will prevent caching of anon content
    # when using GA Javascript. Also you will lose the information of
    # time spend on the site etc..
    if (req.http.cookie) {
       set req.http.Cookie = regsuball(req.http.Cookie, "__utm.=[^;]+(; )?", "");
       if (req.http.cookie ~ "^ *$") {
           unset req.http.cookie;
       }
     }
     ....

                      

More info ¶

https://www.varnish-software.com/blog/adding-headers-gain-insight-vcl

More info ¶

Do not cache error pages ¶

You can make sure that Varnish does not accidentally cache error pages. E.g. it would cache front page when the site is down:

                        sub vcl_backend_response {
    if (beresp.status >= 500 && beresp.status < 600) {
        unset beresp.http.Cache-Control;
        set beresp.http.Cache-Control = "no-cache, max-age=0, must-revalidate";
        set beresp.ttl = 0s;
        set beresp.http.Pragma = "no-cache";
        set beresp.uncacheable = true;
        return(deliver);
    }
    ...
}

                      

Custom and full cache purges ¶

Below is an example how to create an action to purge the whole Varnish cache.

First you need to allow HTTP PURGE request in default.vcl from localhost. We'll create a special PURGE command which takes URLs to be purged out of the cache in a special header:

                        acl purge {
    "localhost";
    # XXX: Add your local computer public IP here if you
    # want to test the code against the production server
    # from the development instance
}
...

sub vcl_recv {
    ...
    # Allow PURGE requests clearing everything
    if (req.method == "PURGE") {
        if (!client.ip ~ purge) {
            return(synth(405, "Not allowed."));
        }
        return (purge);
    }
}

                      

Then let's create a Plone view which will make a request from Plone to Varnish (upstream localhost:80) and issue the PURGE command. We do this using the Requests Python library.

Example view code:

                        import requests

from Products.Five import BrowserView

from requests.models import Request

class Purge(BrowserView):
    """
    Purge upstream cache from all entries.

    This is ideal to hook up for admins e.g. through portal_actions menu.

    You can access it as admin::

        http://site.com/@@purge

    """

    def __call__(self):
        """
        Call the parent cache using Requests Python library and issue PURGE command for all URLs.

        Pipe through the response as is.
        """

        # This is the root URL which will be purged
        # - you might want to have different value here if
        # your site has different URLs for manage and themed versions
        site_url = self.context.portal_url() + "/"

        headers = {
                   # Match all pages
                   "X-Purge-Regex" : ".*"
        }

        resp = requests.request("PURGE", site_url + "*", headers=headers)

        self.request.response["Content-type"] = "text/plain"
        text = []

        text.append("HTTP " + str(resp.status_code))

        # Dump response headers as is to the Plone user,
        # so he/she can diagnose the problem
        for key, value in resp.headers.items():
            text.append(str(key) + ": " + str(value))

        # Add payload message from the server (if any)

        if hasattr(resp, "body"):
            text.append(str(resp.body))

                      

Registering the view in ZCML:

                        <browser:view
        for="Products.CMFPlone.interfaces.IPloneSiteRoot"
        name="purge"
        class=".views.Purge"
        permission="cmf.ManagePortal"
        />

                      

More info ¶

https://www.varnish-cache.org/docs/4.0/users-guide/purging.html

Round-robin balancing ¶

Varnish can do round-robin load balancing internally. Use this if you want to distribute CPU-intensive load between several ZEO front end client instances, each listening on its own port.

Example:

                        # Round-robin between two ZEO front end clients

backend app1 {
    .host = "localhost";
    .port = "8080";
}

backend app2 {
    .host = "localhost";
    .port = "8081";
}

# Directors have been moved to the vmod_directors
# To make directors (backend selection logic) easier to extend, the directors are now defined in loadable VMODs.
# Setting a backend for future fetches in vcl_recv is now done as bellow, is an example redirector based on round-robin requests.

import directors;

sub vcl_init {
    new cluster1 = directors.round_robin();
    cluster1.add_backend(site1);    # Backend site1 defined above
    cluster1.add_backend(site2);    # Backend site2 defined above
}


sub vcl_recv {
    if (req.http.host ~ "(www\.|www2\.)?app\.fi(:[0-9]+)?$") {
        set req.backend_hint = cluster1.backend();
        set req.url = "/VirtualHostBase/http/" + req.http.host + ":80/app/app/VirtualHostRoot" + req.url;
    }

    ...
}

                      

More info ¶

https://www.varnish-cache.org/docs/trunk/users-guide/vcl-backends.html

Varnish 4.x¶

Introduction ¶

Installation ¶

Management console ¶

`varnishadm`¶

Telnet console ¶

More info ¶

Quit console ¶

Purging the cache ¶

Loading new VCL to live Varnish ¶

Logs ¶

Stats ¶

Virtual hosting proxy rule ¶

Varnish 4.x example ¶

Varnishd port and IP address to listen ¶

Cached and editor sub domains ¶

Varnish and I18N ¶

Sanitizing cookies ¶

More info ¶

More info ¶

Do not cache error pages ¶

Custom and full cache purges ¶

More info ¶

Round-robin balancing ¶

More info ¶